Dual Axis Inclinometer HMDS1000B
Hummingbird’s HMDS1000B Dual-Axis Inclinometer (Slope Meter) provides highly visible and configurable pitch and roll measurement and display to operators of industrial machinery.
$990.00
Product Description
Additional Information – HMDS1000B Manual
Hummingbird’s HMDS1000B Dual-Axis Inclinometer (Slope Meter) provides highly visible and configurable pitch and roll measurement and display to operators of industrial machinery.
The Inclinometer (Slope Meter) allows customisation of sensor response times to allow maximum flexibility in various applications.
Alarms and warnings can be configured from the integrated menu and saved to integrated memory.
Designed for harsh industrial environments, the Inclinometer (Slope Meter) features a tough fascia with integrated buttons and LCD graphics display.
An industrial adjustable mount allows for optimum positioning for the operator.
Both pitch and roll can simultaneously be displayed and can optionally be made to invert in the event of an alarm or warning condition. The display is highly visible both at night and in sunlight due to the use of an industrially rated transflective graphics LCD display.
The integrated keypad allows for customisation of the display; in application calibration; warning and alarm setup; minimum and maximum tilt display and sensor customisation.
One HMTS2F0000B 2-axis high-accuracy RS485 tilt sensor is included, with a 15m cable length. When used in combination with the Inclinometer (Slope Meter), accuracy of one degree and customisable frequency response are achievable.
Integrated alarm and warning relays provide normally open, normally closed and common outputs. Both warnings and alarms can be configured to be normally-on or normally-off.
Optional password protection on the setup menu can be configured by the user.
The Inclinometer (Slope Meter) is supplied in a rugged ABS plastic enclosure with a polycarbonate fascia.
A fully adjustable RAM 1″ ball mount can be screw mounted to the vehicle, or optional suction mounts are available.
Power, outputs and the sensor are connected through a Deutsch DT12 socket at the rear of the unit. The wiring loom is made from flame-retardant Exane© wire.
Features
- 9V to 36V supply voltage
- Adjustable industrial mount
- Highly visible pitch and roll readout
- Configurable numeric or graphical display
- Adjustable backlight
- Integrated user interface for customisation
- One degree accurate, variable frequency response sensors
- Highly configurable warning and alarm functions
- Integrated warning and alarm relays
- Integrated buzzer
Specifications
Technical Specifications
- Input voltage: minimum 9V; maximum 36V
- Power consumption (W): maximum 2W (165mA @ 12V) – includes dual axis tilt sensor
- Warning relay output: normally open or normally closed, 36V max, 1A max, internally fused
- Alarm relay output: normally open or normally closed, 36V max, 1A max, internally fused
- Maximum tilt: -90 to 90 degrees, recommended use -60 to 60 degrees
- Maximum tilt: -90 to 90 degrees, recommended use -60 to 60 degrees
- Accuracy: one degree from 0 to 30 degrees, 2 degrees from 30-60 degrees
- Refresh rate: 10 updates per second
- Frequency response: 10Hz to 0.1Hz, user settable
- Communications protocol: enhanced RS485 – differential, will operate with one broken connection
Physical Characteristics
- HMTS2F0000B dimensions:57mm (base width), 82mm (w), 51mm (h), 32.2mm (d), cable 15m (l)
- Wiring loom dimensions: 50cm (l)
Environmental Specifications
- Operating temperature: -40°C to +85°>C
- Humidity: 5% to 95% relative humidity
Reviews
There are no reviews yet.