Topcon RL-H5A Laser Level Rechargeable Pack with 2x LS-80X Receiver

Product Description

Topcon RL-H5A Laser Level Rechargeable Pack

Package includes; 2x LS-80X Receiver, 2x Holder 6, Carry Case, 5 Year Warranty.

PNO: 1021200-09

Next Generation Self-Leveling Construction Laser

Long-range operation (800m)

Smart long-range receiver

Simple, intuitive manual slope capability

+/- 10 Arc second horizontal accuracy

+/- 5 Degrees self-leveling range

Up to 100 hours battery life

Long-range High Accuracy Laser

With great distance and high-accuracy, the RL-H5 Series is simple to use for checking elevations

Easy to Use

With electronic self-leveling, you press the power button and go right to work in seconds. If the RL-H5A gets disturbed on the job it re-levels itself automatically. The self-leveling motors are accurate to +/- 10 arc seconds.

Long Range Operation

Need to shoot elevations up to 400 m from your laser? No problem – this instrument has the power and range to cover a 800 m diameter job site.

Long Battery Life

The RL-H5A gives you the option of up to 60 hours of continuous usage with the rechargeable battery pack or 100 hours with (4) D Cell Batteries.

All Weather Dependability

With the IP66 rating, the RL-H5A is job site tough and can withstand dust, a sudden shower and even torrential rainfall.

Kit Components

RL-H5A Laser

LS-80X  Sensor

Sensor Holder 6

Batteries (Rechargeable)

Carry Case

Five Year Guarantee

The RL-H5A laser comes with a Five Year Guarantee. Topcon is backing up this reliable, accurate laser with the best factory warranty in the industry.

Specifications:

Accuracy                          H:+/- 10 arc seconds

Self-leveling Range        Horizontal +/- 5 degree

Working Area                 800 meters

Rotating Speed              600 rpm

Dust/Water Rating        IP66

Operating Time              Alkaline: 100 hours / Ni-MH: 60 hours

Operating Temp            -20 degC to 50degC

Size (H x W x L)               205 x 211 x 172 mm

Topcon LS-80X Laser Receiver with Holder 6 Receiver Clamp

p/n: 1046259-01

The Topcon LS-80X Laser Receiver Sensor Detector is able to allow you to have a longer range when using a red beam rotary laser. The unit can be adjusted for either a fine or course band, which will help improve the accuracy. It has an audible notice for the height, to make sure it is adjusted properly The Newly improved LS-80X has a rear mounted speaker with a louder setting for a louder audible tone on noisy jobsites where the audible tone is hard to hear. You can select from 11 different channels to display the data on the LCD display.

With a rating of IP-66, the Topcon LS-80X Laser Receiver Sensor Detector is protected against dust and water. The unit is in a rubber case, so it is also protected against dropping it. It will stand up to a variety of job conditions. It can also be mounted with a Holder 6 bracket, so it will be more stable.

The Topcon LS-80X Laser Receiver Sensor Detector runs on two AA batteries. It will run for up to 120 hours, allowing for plenty of work time on the job site. It will also shut down after 30 minutes if it hasn’t been used, to help save the battery life.

Topcon LS-80X / 1046259-01 Receiver SPECIFICATIONS

• Working Diameter 3 to 3,100 feet
• Defective Precision High Precision +/- 1.0mm
• Normal Precision +/- 2.0mm
• Detective Range 50mm
• Dual LCD (Both Sides)
• Arrow Display: 9
• Numeric Readout: N/A
• Speaker Levels: Loud/Low/Off
• Warning Display
  • Height Alert
  • Battery Level
• Auto Shutoff: 30min
• IP Rating: IP66
• Operating Temperature: -20 to +50C
• Dimensions: 146 (L) x 76 (W) x 25 (H) mm
• Power Supply: 2x AA Dry CELL or Alkaline
• Battery Life: 120h (Alkaline)

PLUS

Topcon Holder 6 Receiver Clamp

pn ; 312890112

The Topcon Sensor Holder 6 is designed to hold the Topcon LS-80 and LS-70 laser receivers. The clamp holds the receiver securely, so you do not have to worry about it getting damaged. It can then be mounted to a tripod or other wide surface, to keep it where you need it. It also works to being attached to a levelling staff. The static thread keeps the side of the clamp from being in the way. It is strong and lightweight, making it sturdy enough for the job site.

The Topcon Holder 6 laser receiver bracket works with the following laser receivers:

• Topcon LS-80A laser receiver (57140)
• Topcon LS-80B laser receiver (57131)
• Topcon LS-80G laser receiver (57149)
• Topcon LS-80L laser receiver (57181)
• Topcon LS-B10 machine control laser receiver (57110)

View Brochure